Intertek-Solutions

With flat roof protection, the laser scanners can be installed directly on the building. This removes the need for expensive installations or attachments on the roof. The monitoring area for the system is set up approx. 30 cm above the ground so that any persons crawling under the alarm zone are detected and registered. The edge of the monitoring area can also be placed slightly above the edge of the roof so that any ladders, for instance, are detected at once. The arrangement of the monitored areas, the choice of object size to be detected and flexibly adjustable response times mean any movement of animals, birds or leaves through the monitored area will not trigger an alarm (filter function).

• High level of protection against intrusion

• Seamless monitoring of light domes and bands of light

• Early indication of break-in attempts

• Monitoring of large areas using just a few sensors

• Simple, low cost retrofitting

• Low installation and wiring costs

• Prevention of destruction to property with associated low follow-up costs

Rooftop Laser Scanner monitors the building roof for intruders

Vertical Laser Scanner monitors the front of the building. Scanner can be programmed not to detect people entering front door during certain hours. All other times, an attempt to enter the front door will cause an alarm.

Laser scanner along the fence perimeter will detect anyone attempting to climb over the fence, dig under the fence or cut the fence. Persons passing outside the fence or shaking the fence will not cause alarms. Animals, birds, and flying debris will not cause alarms.

Roof Protection

Laser scanner monitoring rooftop

Laser scanner monitoring rooftop

Illustration of Laser Scanning Fields (configured for intrusion detection)

Roof Protection

Laser scanner monitoring rooftop

Laser scanner monitoring rooftop

Illustration of Laser Scanning Fields (configured for intrusion detection)

This website uses cookies.